I tried to call Chemical Engineering Corp (the manufacturer, this is a pre-MacClean unit), but all I get is a fax machine. I'm assuming I also have a plugged brine line somewhere (maybe in the brine tank I didn't clean that part) which is why the brine level only goes down about 2 inches in ~50 minutes of my "extended" brine cycle. Looks to me like the problem is in the controls somewhere (not the physical valving). At the end of the cycle, the motor runs and advances everything back to the starting position (so I get about a 10-second rapid rinse and a 10-second brine refill as the valve is moving). The softener can be installed inline on the water supply line to the solution. But when the control changes to step 3 (and 4), the motor does NOT run so the valve stays in the same (Brine) position (all the way down). This type of softener is available from manufacturers like Calgon or MacClean. The valve moves correctly for steps 1 and 2. There are four steps in regeneration: 1) Backwash, 2) Brine, 3) Rapid Rinse, and 4) Brine Refill. To refresh the bed, run Iron-Out through the system. Clean an iron-fouled resin bed: If your water contains iron, it will eventually foul the resin bed that removes the hard water particles and replaces them with sodium. I watched as it recycles, and it appears that the control valve is not moving correctly. Use soap and water to thoroughly clean the tank (and the brine well inside the tank if you have one) and rinse it. I greased all the seals and O-rings with silicone grease and reassembled it. I tore the control head completely apart and cleaned everything (the cylindrical screen at the brine inlet was almost plugged with iron deposits). Aquios FS-220 Salt Free Water Softener and Filtration System. Aquios AQFS220C Full House Water Softener and Filter System. McLean Engineering is now Crystal Clear Water, but we maintain our commitment to serving our customers with the best products & services Learn more. Now, it uses VERY little salt, does not refill the brine tank properly, and does not soften adequately. Fleck 9100SXT Complete Twin Tank Mini Compact Water Softener System 24/7 Soft Water. First, we would get a big slug of salty water every time it would regenerate (which I would have to manually flush out). I'm having problems with an Intellis water softener, about 10 years old.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |